|HOW TO IMPROVE YOUR FORTUNE
BY PROPER LAYOUT OF YOUR OFFICE
First of all an ideal site, free from any of Vastu defects
should be selected. After selecting the site, in designing
a lay-out for industry and providing for utilities special
attention should be paid for the following aspects :
sloping of floors should be towards East, North and North-East,
More open space should be left in the East and North side.
height can be equal in all sides, otherwise South and
Western sides should not be taller in height as compared
to East and North.
bore well, underground reservior, sink, pools, swimming
pools etc. should be located in North-East or Eastern
zone, preferably between MidEast and NorthEast.
cases should always be provided in SouthWest part of the
water tank may be erected in SouthWest, South or West.
Its height should be more than that of buildings height
in NorthEast corner.
may be placed in NorthWest or SouthEast. NorthEast and
SouthWest corners should be strictly avoided for this
bridge or weighing machines may be placed in NorthWest
of heavy vehicles like trucks, tractors, trollies or cranes
etc, should be on the roads outside or if it is to be
inside, they should be parked in SouthWest zone.
scooter, cars, light commercial vehicles can be parked
in NorthWest, North or East side of buildings. NorthEast
should always be free from any parking of vehicles.
with big avenue trees can be developed on South and West
lawns with fountains etc (without big trees) can be developed
in NorthEast, North and East also. Here only small plants
can be grown.
and other office blocks can be constructed in North, East,
South or SouthWest keeping the heights of these buildings
lower than that of main factory.
quarters may be built on East without touching East wall,
in North, West or SouthEast. Multi storyed flats may be
constructed in South zone without touching main factory
canteen may be placed in SouthEast.
Room should be placed near gates in such an advantageous
position so that the guards can see approaching persons,
vehicles etc. without any obstruction. NorthEast direction
should be avoided for a guard room or security cabin.
For East facing gate the security office should be on
SouthEast side of gate, and for North facing gate it should
be on NorthWest side.
office should be placed near gate for entry for workers
but not in the South direction.
plants and machinaries should be erected in West, South
and SouthWest zones leaving the NorthWest and SouthEast
corners. NorthEast and centre of the building should be
avoided for placing heavy machinaries.
and auxillary machines, work equipments and tools can
be placed in Eastern and Northern sides except in NorthEast,
NorthWest and SouthEast corners.
boilers, ovens,oilfired or electric furnaces, switch gears,
capacitors, transformers, control panels, smoke chimney
etc. all should be located in SouthEast.
raw materials stores may be placed in SouthWest, South
processed materials can be stocked in South or West sides.
goods stores, packing and forwarding can be in NorthWest,
in East or SouthEast. NorthWest is preferable. NorthEast
should always be avoided.
workshop may be in South, SouthWest avoiding NorthEast
and centre. Maintenance and consumable stores should be
nearer to the workshop.
temple (even a small will do) in the NorthEast corner
should be built and maintained neat and clean. No material
should be stacked here.
in the administrative building or in other parts of factory
or mill should be made in SouthEast or NorthWest area
and if septic tank is to be built for that purpose, it
should be built in between North and NorthWest or between
East and SouthEast.